Christmas is only four weeks away at this point and if you’re anything like my mum you’re perhaps also already decorating your home. Around here we like to keep things traditional with wood carved stuff from the Erzgebirge, glass baubles and similar, but who’s to say that putting up some LEGO couldn’t be part of the mix as well. The seasonally themed Mr. & Mrs. Claus (40274) and Reindeer, Elf & Elfie (40353) Brickheadz cater for just that.
A family shot of the sets from two consecutive years shows that there is a bit of underlying deeper logic and the sets mix and match quite well. The only thing that is missing is of course a suitably sized sleigh model stuffed with gifts.
Somehow I missed out on Mr. & Mrs. Claus last year, so it was a pleasant surprise to see that LEGO had re-issued the set this year. That’s always a good indication that the sets are in popular demand and sell well, in turn making good prospects for more sets of the same ilk in the future, whatever those might be.
In terms of construction there aren’t that many surprises or more or less none at all, with the two figures being essentially based on the v1 Brickheadz standard (I totally made that up, but it’s perhaps helpful for understanding some of the differences). This means that there aren’t any fancy building techniques involved and it follows the pattern of most others of these figures. If you have that drill worked out to a T, you could likely build Mr. Claus from your head and figure things out without even looking at the instructions, give or take a few specifics like the tip of the cap.
Mrs. Claus is slightly different in that she extensively uses curved slopes to make her look rounded. This naturally adds a bit of complication in that there are extra plates here and there to account for the step/ offset of the slopes. It would be more difficult to re-create without any guidance. It also makes her look adorable and cuddly and that’s why of the figures discussed in this article she’s my favorite. I really can’t fathom why I skipped over this set last year. Perhaps i just wasn’t able to make it to the LEGO store in time…
This year’s Christmas set takes a slightly different approach and only contains one full-sized Brickheadz figure, but makes up for it by including two of the smaller elves.
Out of the three, the the reindeer itself is perhaps the least attractive. Don’t misunderstand me – it hits all the marks and looks okay, yet it doesn’t stand out particularly. In my view this is owed to its simple, mostly symmetrical construction. The model would clearly have benefited from a bit more variation, be that just a hint of its furriness by ways of using some angled slopes for bangs on the forehead.
I also wished they had come up with something a bit more impressive and elaborate for the antlers. The small ancillaries feel a bit out of place, too, in particular since they are not further contextualized by something else to go with them. Admittedly it doesn’t help that I didn’t apply the stickers to the way sign, but then again for all intents and purposes those should always be printed in a Brickheadz set.
The elves, tentatively called just Elf and Elfie use a new building style with just 3 studs wide/ deep main bodies and reduced height to make them appear smaller compared to the “adults”, of course. That puts them at around three-quarters size, which isn’t that much when you come to think of it, but sufficient to make them look different enough.
That said, the smaller size comes with a bit of a caveat that you must not underestimate. Since currently there are no dedicated 3 x 1 bricks with studs on the side in the LEGO portfolio, the models have to make do with 1 x 1 and 2 x 1 versions. In some cases that means that where they converge at the edges only one side can have studs and the other has a smooth surface. This in turn affects how the tiles and plates on the exterior can be fixated and here is where it gets a bit dicy.
You have to be extra careful to use the right SNOT bricks in the right places and keep an eye on their orientation or you may end up wondering forever, how the heck you are supposed to attach some parts without a stud looking at you. That is even more crucial insofar some of the tiles really rely on just hanging on to a single stud with their ability to move merely being restrained by the neighboring elements. It’s a bit delicate, but works surprisingly well if you don’t completely mess up this sort of alternating pattern of forces and counter forces.
On the whole both sets are worth their money, the simple fact notwithstanding that they are only available from LEGO directly, anyway, and thus any discussion about prices would be kinda pointless. If you’re on a budget, regardless, I’d go with Mr. & Mrs. Claus for the time being. not only might you regret not being able to purchase the set in the future, but overall it feels like you’re getting a better value.
The reindeer set on the other hand could have needed that extra little kick by including perhaps a bunch of buildable gift packages, the already mentioned sleigh, a food tray with some carrots and hay or whatever else. Just something to provide a little something that puts a satisfied grin on your face…
Mylenium's Brick Corner 